Product Details
- Product Details
- Machine Unit
-
- Commodity name: 8.7/15kV Cold Shrink Cable Terminal, Three Core Silicone Rubber Cable Termination for outdoor
- Commodity ID: 7
Model: 15kV Adapter max size: 500mm² Material: Liquid Silicone Rubber Application: Cable termination Applicable cables: XLPE, PVC, EPR, etc. Execution Standards: IEC60502.4, GB/T12706.4
Product Introduction
- Cold shrink terminations are components that use silicone rubber to be injection vulcanized in the factory, then enlarged and lined with plastic spiral supports to form various cable accessories.
- Medium Voltage cold shrink terminations products are suitable for 8.7/15kV, XLPE, and EPR single-core, two-core, three-core power cables. Cold shrinkable cable accessories have the advantages of small size, easy and rapid operation, no need for special tools, wide application range and few product specifications. Compared with heat-shrinkable cable accessories, it does not require fire heating and is widely used in various fields such as electric power, petrochemicals, metallurgy, railways, and port construction.
- Product execution standards: IEC60502.4, GB/T12706.4
5 Core Product Advantages
- 1. Premium Liquid Silicone Rubber Raw Material
The silicone rubber withstands extreme high and low temperatures, aging, ozone erosion and ultraviolet radiation. No chalking, cracking or hardening occurs after long-term outdoor exposure.
- 2. Integrated Factory Pre-molded Stress Control Structure
The pre-installed stress cone evenly distributes high-voltage electric fields. No corona discharge or surface leakage traces appear even in high-humidity coastal salt fog zones and heavily polluted industrial plant environments.
- 3. Fire-Free Cold Shrink Installation for High Construction Efficiency
No open-flame heating equipment is needed. A single technician can fully install one set of terminals within 10 minutes
- 4. Excellent Mechanical Compatibility & Anti-Vibration Performance
The elastic structure adapts to multiple cable outer diameter ranges within one specification model. It stays closely attached to cable insulation under continuous equipment vibration and alternating hot/cold cycles, preventing loosening and water penetration.
- 5. Fully Sealed Waterproof & Moisture-Proof Design
Matched with dedicated waterproof sealant and insulating self-amalgamating tape, the terminal is suitable for cable trenches, direct underground burial and overhead pole mounting. It completely blocks water vapor intrusion that would otherwise cause insulation breakdown and power failure.
Electrical Performance Parameters
The product has passed the inspection and certification of the China Electric Power Research Institute (CEPRI) Power Industry Electrical Equipment Quality Inspection and Testing Center Type test reference standard: IEC 60502-4:2010 GB/T 12706.4-2008
SPT-10kVLSN-
Items
Parameter
Technical Parameters
Cable rated voltage
8.7/15kV
Frequency withstand voltage(AC)
42kV/5min
Partial Discharge
15kV＜10pC
Impulse voltage
110kV
Immersion test
1010 cycles in water at he conductro temperature of 95°C to 200°C and 22KV
Salt fog test No breakdown at 11KV for 1000h Applicable cable cross section
25-400mm²
Model Selection Table
Product name
Nominal cross section (mm²)
Kit Code
3-core cold shrinkable
indoor termination
25-50
SPT-10kVLSN-3/1
70-120
SPT-10kVLSN-3/2
150-240
SPT-10kVLSN-3/3
300-400
SPT-10kVLSN-3/4
Single core cold shrink
indoor termination
25-50
SPT-10kVLSN-1/1
70-120
SPT-10kVLSN-1/2
150-240
SPT-10kVLSN-1/3
300-400
SPT-10kVLSN-1/4
Belongs to category:
Product Consultation
Related Products
35KV indoor Silicone Cold Shrink Cable Termination Kit for XLPE Power Cables
35KV outdoor Silicone Cold Shrink Cable Termination Kit for XLPE Power Cables
10kV Cold-Shrinkable Cable Joint (Intermediate Connector)
8.7/15kV Cold Shrink Cable Terminal, Three Core Silicone Rubber Cable Termination for outdoor
Summary Description:
Share to:
Contact Us
Address: No. 4,Yuxin Rd.Yulv Community, Yutang Subdistrict, Guangming Distric, Shenzhen, Guangdong, China.